GPSC Engineering Services Syllabus 2022 PDF – Download Exam Pattern!!!

GPSC Engineering Services Syllabus 2022 PDF – Download Exam Pattern!!!
[ad_1]
GPSC Engineering Services Syllabus 2022 PDF – Download Exam Pattern!!!
GPSC Engineering Services Syllabus 2022 PDF – Download GES (Civil) Class 1 and Class 2 Exam Pattern!!!

GPSC GES Syllabus 2022 PDF. Gujarat Public Service Commission has uploaded the Syllabus for the Competitive Examination Of Gujarat Engineering Service (Civil) Class-I and Class-II on the Official Site. Candidates, who have applied for this Competitive Exam, must download this Syllabus and Exam Pattern from our website.

GPSC Engineering Services Syllabus 2022 | Gujarat Engineering Services Mechanical Syllabus | Gujarat Engineering Services Civil Syllabus

Name of the Board Gujarat Public Service Commission
Exam Name Gujarat Engineering Service (Civil) Class-I and Class-II
Exam Date Announced Soon
Selection Process Prelims, Mains Examination
Status Syllabus Available

Gujarat Engineering Services Exam Pattern 2022:

  • Gujarati and English Papers in Main Exam shall be in respective Language only.
  • The medium of the examination shall be English. The medium of the Part I General Studies of Paper-1 shall be in Gujarati and English.

Preliminary Examination:

Nature of Exam Name of the Paper Time Total Allotted Marks
Objective Part-I General Studies,

Part-II Engineering Aptitude

2 Hours 100

100

  Civil Engineering 3 Hours 300
Total Marks 500

Main Examination (For only those candidates who are declared qualified in Preliminary Examination):

Nature of Exam Name of Paper Time Total Allotted Marks
All Papers are Descriptive Gujarati 2 Hours 100
English 2 Hours 100
Civil Engineering –I 3 Hours 200
Civil Engineering-II 3 Hours 200
Civil Engineering-III 3 Hours 200
Total Marks of written Examination 800
Interview (Only for the candidates who are declared qualified in Main Written Examination) 100
Total Marks to be considered for Final Selection 900

GPSC Engineering Services Syllabus 2022 (Civil) Class-I and Class-II:

Part-I General Studies:

Indus valley Civilization: Features, Sites, Society, Cultural History, Art and Religion. Vedic age. Important Dynasties of India and Gujarat – Impact and Contribution, Important Policies, their administration, economy, society, religion, literature, arts and architecture. India’s Freedom Movement, Revolutionaries in India and abroad. Achievements and administrative reforms of the rulers of princely states of Saurashtra, Kutchh and Gujarat.

Cultural Heritage of India and Gujarat: Art forms, Literature, Litterateurs, Sculpture and Architecture, Important organizations and institutions

Geography of India and Gujarat: Physical, Social and Economic. General issues, legal aspect, policies and treaties on Environment Ecology, Biodiversity and Climate Change. Forest and Wildlife Conservation in India. Environmental Hazards, Pollution, Carbon Emission, Global warming.

Indian Constitution: Evolution, features, Preamble, Fundamental Rights, Fundamental Duties, Directive Principles of State Policy, Amendments, Significant Provisions and Basic Structure. Panchayati Raj, Public Policy and Governance.

Indian Economy: Emergence and development of planning exercise in India, Performance, Dynamics, Challenges, New Initiatives, Reforms etc. by the State and Central Government. Important Events, Developments and Social Sector Initiatives. NITI Aayog: aims, constitution and functions. Social Audit. Regulatory framework for money and banking: concepts, structure and role.

Science and Technology: Relevance of Science & Technology to the day to day life; Institutions and Organization in India promoting integration of Science, Technology and Innovation, their activities and contribution; Contribution of Prominent Indian Scientists. Awareness in the field of Information and Communication Technology (ICT), Space Technology, Technology in Defence, Biotechnology, Nanotechnology etc. Energy policy of India, Nuclear Policy of India.

Part II: Engineering Aptitude:

  1. Engineering Aptitude covering Logical reasoning and Analytical ability.
  2. Engineering Mathematics and Numerical Analysis.
  3. General Principles of Design, Drawing, Importance of Safety.
  4. Standards and Quality practices in production, construction, maintenance and services.
  5. Basics of Energy and Environment: Conservation, environmental pollution and degradation, Climate Change, Environmental impact assessment.
  6. Basics of Project Management.
  7. Basics of Material Science and Engineering.
  8. Information and Communication Technologies (ICT) based tools and their applications in Engineering such as networking, e-governance and technology based education.
  9. Ethics and values in engineering profession.

Syllabus of Main Examination for the Gujarat Engineering Service (Civil) Class-I and Class-II

ESSAY (A minimum of 250 words and a maximum of 300 words): Choose any one topic from a list of five. (Descriptive/ analytical/ philosophical/ based on Current Affairs).

LETTER WRITING (in about 150 words):

A formal letter expressing one’s opinion about an issue. The issues can deal with daily office matters/ a problem that has occurred in the office/ an opinion in response to one sought by a ranked officer/issues pertaining to recent concern etc.

REPORT WRITING (in about 200 words): A report on an official function/ event/ field trip/survey etc.

WRITING ON VISUAL INFORMATION (in about 150 words): A report on a graph/image/ flow chart/table of comparison/ simple statistical data etc.

FORMAL SPEECH (in about 150 words): A speech (in a formal style) that is to be read out in a formal function. This could be an inauguration speech, an educational seminar/conference, a formal ceremony of importance etc.

PRECIS WRITING: A precis in about 100 words for a 300-word passage.

READING COMPREHENSION: A reading passage of about 250 words to be given followed by short-answer type questions.

ENGLISH GRAMMAR:

  1. Tenses
  2. Voice
  3. Narration (Direct-Indirect)
  4. Transformation of sentences
  5. Use of Articles and Determiners
  6. Use of Prepositions
  7. Use of Phrasal verbs
  8. Use of idiomatic expressions
  9. Administrative Glossary
  10. Synonyms/Antonyms

TRANSLATION:

Translation of a short passage (of about 150 words) from Gujarati to English.

(Main Examination – Descriptive):

The structure of the question paper shall be as below:

No of Questions Marks Allotted to each Question Word limit for each Answer Total Marks
11 10 As per given space 110
10 15 As per given space 90

Building Materials:

Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminium, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates: Classification, properties and selection criteria; Cement: Types, Composition, Properties, Uses, Specifications and various Tests; Lime & Cement Mortars and Concrete: Properties and various Tests; Design of Concrete Mixes: Proportioning of aggregates and methods of mix design, Pre-cast and Pre-fabricating technology.

Solid Mechanics:

Elastic constants, Stress, plane stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear and Torsion.

Structural Analysis:

Basics of strength of materials, Types of stresses and strains, Bending moments and shear force, concept of bending and shear stresses; Analysis of determinate and indeterminate structures; Trusses, beams, plane frames; Rolling loads, Influence Lines, Unit load method & other methods; Free and Forced vibrations of single degree and multi degree freedom system; Suspended Cables; Concepts and use of Computer Aided Design.

Design of Steel Structures:

Principles of Limit State methods, Design of tension and compression members, Design of beams and beam column connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.

Design of Concrete and Masonry structures:

Design, Design process, Design philosophy. Limit state design for bending, shear, axial compression and combined forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks, Staircases; Principles of pre stressed concrete design including materials and methods; Design of Masonry Structure.

RC Design: Loading standards as per I.S, distribution & flow of loads, lateral load due to wind as per IS: 875(Part – III), load combinations, guide lines for preparation of structural layout for building.

Earthquake Engineering: Fundamentals of Earthquake Vibrations of buildings, Earthquake Basics, Earthquake resistant Masonry features, Philosophy of earthquake resistant design, earthquake proof v/s earthquake resistant design, seismic structural configuration, Introduction to IS: 1893(Part I), IS: 875 (Part V). Seismic load: Seismic coefficient method – base shear and lateral force distribution along height. Introduction to Response spectrum, IS code provisions. Modal analysis of building frame, Lateral Loads on Buildings, Lateral Load Distribution, Ductile Detailing, Introduction to soil liquefaction, structural controls & Seismic strengthening.

(Main Examination – Descriptive):

No of Questions Marks Allotted to each Question Word limit for each Answer Total Marks
11 10 As per given space 110
10 15 As per given space 90

Paper 4: Civil Engineering-II

Building Construction General Principles of Building, Brick and stone masonry walls, types of masonry, cavity walls, reinforced brickwork, building services, detailing of floors, roofs, ceilings, stairs, doors and windows, finishing, formwork, functional planning of building, orientations of buildings, low cost housings.

Flow of Fluids, Hydraulic Machines and Hydro Power:

(a) Fluid Mechanics, Open Channel Flow, Pipe Flow: Fluid properties; Dimensional Analysis and Modelling; Fluid dynamics including flow kinematics and measurements; Flow net; Viscosity, Boundary layer and control, Drag, Lift, Principles in open channel flow, Flow controls. Hydraulic jump; Surges; Pipe networks.

(b) Hydraulic Machines and Hydro power – Various pumps, Air vessels, Hydraulic turbines – types, classifications & performance parameters; Power house – classification and layout, storage, pondage, control of supply.

Hydrology and Water Resources and Irrigation Engineering: Hydrological cycle, measurement and analysis of rainfall, Ground water hydrology, Well hydrology and related data analysis; Streams and their gauging; River morphology; Flood, drought and their management; Capacity of Reservoirs.

Environmental Engineering:

Water Supply Engineering: Sources, Estimation, quality standards and testing of water and their treatment; Rural, Institutional and industrial water supply; Physical, chemical and biological characteristics and sources of water, Pollutants in water and its effects, Estimation of water demand; Drinking water Standards, Water Treatment Plants, Water distribution networks.

Waste Water Engineering: Planning & design of domestic waste water, sewage collection and disposal; Plumbing Systems. Components and layout of sewerage system; Planning & design of Domestic Waste-water disposal system; Sludge management including treatment, disposal and re-use of treated effluents; Industrial waste waters and Effluent Treatment Plants including institutional and industrial sewage management.

Solid Waste Management: Sources & classification of solid wastes along with planning & design of its management system; Disposal system, Beneficial aspects of wastes and Utilization by Civil Engineers.

Civil Engineering in Gujarat- Important Buildings, Monuments and Construction- Historical as well as Modern. Important Reservoir-Its Storage, Catchment and Command Area, Technical features and important characteristics.

Current Trends and Recent Advancements in the field of Civil Engineering.

Paper 5: Civil Engineering-III

No of Questions Marks Allotted to each Question Word limit for each Answer Total Marks
11 10 As per given space 110
10 15 As per given space 90

Construction Practice, Planning and Management: Construction – Planning, Equipment, Site investigation and Management including Estimation with latest project management tools and network analysis for different Types of works; Analysis of Rates of various types of works; Tendering Process and Contract Management, Environment Clearance, Quality Control, Productivity, Operation Cost; Land acquisition; Labour safety and welfare, maintenance and repair, Electrical layouts of simple Buildings, Heat Ventilation and air conditioning, Fire safety.

Geo-technical Engineering and Foundation Engineering:

Geo-technical Engineering: Soil exploration – planning & methods, Properties of soil, classification, various tests and interrelationships; Permeability & Seepage, Compressibility, consolidation and Shearing resistance, Stability of slopes, Earth pressure theories and stress distribution in soil; Properties and uses of geo-synthetics, Basics of foundation, Subsurface Investigation, Bearing capacity of shallow foundation, Pile foundations.

Foundation Engineering: Types of foundations & selection criteria, bearing capacity, settlement analysis, design and testing of shallow & deep foundations; Slope stability analysis, earthen embankments, Dams and Earth retaining structures: types, analysis and design, Principles of ground modifications, ground water control techniques, and cofferdams.

Surveying and Geology:

Surveying: Classification of surveys, various methodologies, instruments & analysis of measurement of distances, elevation and directions; Field astronomy, Global Positioning System; Map preparation; Photogrammetric; Remote sensing concepts; Survey Layout for culverts, canals, bridges, road/railway alignment and buildings, Setting out of Curves. Application of Geoinformatics in Civil Engineering: Land use and land cover mapping, Transportation studies, crop inventory studies, ground water mapping, urban growth studies, flood plain mapping, waste land mapping, Waste disposal facility in urban areas and disaster management.

Geology: Basic knowledge of Engineering geology & its application in projects. Types of structures and classification and their effect on Civil Engineering projects and Geological mapping.

Transportation Engineering:

Highways – Planning & construction methodology, Alignment and geometric design; Traffic Surveys and Controls; Principles of Flexible and Rigid pavements design. Different modes of Transport.

Tunnelling – Alignment, methods of construction, disposal of muck, drainage, lighting and ventilation.

Bridges – Fundamentals of Bridge Engineering, Bridge Site Investigations and Planning, Bridge Hydrology, Standards of Loadings for Bridge Design, Different Types of Bridges, Bridge Superstructure, Bearings and Substructure Design, Design of Bridge Foundations, Bridge Approaches, River Training Work & Protection Work, Methods of Bridge Construction, Inspection, maintenance & Repair of Bridges, Testing of Bridges, Bridge Architecture.

Road safety measures.

Repairs and Rehabilitation of Structures Repair Strategies, Serviceability and Durability of Concrete, Materials and Techniques for Repair, Repairs, Rehabilitation and Retrofitting of Structures, Demolition Techniques.

Download GPSC GES Syllabus 2022 PDF

Official Site

What is the Exam Date for GPSC GES 2022?

 

The GPSC GES Exam Date will be announced soon.

 

What is the Selection Process for GPSC Engineering Services 2022?

 

Selection will be based on Prelims and Mains Examination.

 

How to download GPSC Engineering Services Syllabus 2022 PDF?

 

Candidates can download GPSC Engineering Services Syllabus 2022 PDF from our website.

Latest Job Notification 2022

Our Social Media Links

Join Our Telegram Chanel

Join Our Facebook Page

Join Our Twitter Page

Join Our LinkedIn Page

Join Our YouTube Chanel

Source link

Spread the love

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top